Start with an empty Chameleon floor register…
…fill it with pieces of your flooring material…
…and create a perfect match.
What Is A Chameleon?
A Perfect Match
Practical & Attractive
Flush-mounted Chameleons are a major improvement over standard heat vent covers. With their exceptional durability, they integrate with your hard-surface flooring for a perfect match. Chameleons come in all standard vent sizes and can be ordered in custom sizes.
Versatile
Use a Chameleon Tile & Stone Register for ceramic or porcelain tile, and with natural stone such as marble, granite, and slate. These floor grates can also be used with concrete, cork, hardwood, or bamboo. Chameleons can be mounted on a tile or stone wall as an attractive air return grille. For laminate flooring, choose the Chameleon Laminate Register.
Built To Last
Chameleon Floor Vent Registers are made in the USA of aircraft-grade aluminum and engineered to stand up to heavy foot traffic.
Easy To Install
Within minutes, experienced floor installers or handy homeowners can easily cut pieces of flooring material to fit within the Chameleon’s channels.
Chameleon Tile & Stone Registers
The Most Versatile Floor Register!
Chameleon Tile & Stone Registers are used with ceramic tile, porcelain tile, slate, granite, marble, travertine, concrete, cork, hardwood, and bamboo floors. Registers for either 5/16-inch or 1/2-inch material are available. Specify which thickness when ordering.
Available in these standard sizes (inches). Measure the vent opening & order.
- 2 1/4 x 10
- 2 1/4 x 12
- 2 1/4 x 14
- 3 x 10
- 4 x 8
- 4 x 10
- 4 x 12
- 4 x 14
- 6 x 10
- 6 x 12
- 6 x 14
- Custom on Request
Available in these two thicknesses:
- For 5/16″ material
- For 1/2″ material
Dampers Available for Each Size!
Chameleon Laminate Registers
Now, a Register Just for Laminate Floors!
The Chameleon Laminate Register is used with laminate floors and accommodates laminate material that is 7mm and 8mm thick as well as 12mm thick. You must specify which thickness when ordering. Made of sturdy aircraft-grade aluminum, these Registers are built as one piece.
Available in these standard sizes (inches). Measure the vent opening & order.
- 2 1/4 x 10
- 2 1/4 x 12
- 2 1/4 x 14
- 3 x 10
- 4 x 8
- 4 x 10
- 4 x 12
- 4 x 14
- 6 x 10
- 6 x 12
- 6 x 14
- Custom on Request
Available in these two thicknesses:
- For 7 & 8mm (1/4″ – 5/16″) matieral
- For 12mm (1/2″) material
Contact Us
Chameleon Registers
Isla Carmen LLC
229 E Reserve St Suite 104
Vancouver WA 98661
Contact Us by Email
"*" indicates required fields